Schedule Mold Inspection — +1-844-578-1604
🔍 Certified Mold Inspection — San Antonio, TX

Know What You're Dealing With: Mold Inspection for San Antonio, TX Properties

Whether you smell mold but can't find it, or need a clearance inspection after remediation, our San Antonio, TX Mold Inspection team gives you documented, defensible findings — not guesswork.

📞 Schedule Your Mold Inspection — +1-844-578-1604
Licensed Mold Inspection service in San Antonio, TX - Cheap Mold Removal
Why Choose Us

What Sets Our San Antonio Mold Inspection Apart

Thermal imaging, calibrated moisture meters, and accredited lab analysis — not a flashlight and a nose.

🔒
IICRC-Certified Inspectors in TX
Every Mold Inspection in San Antonio, TX is conducted by an IICRC-certified inspector — not a general contractor with a moisture meter.
📷
Thermal Imaging & Moisture Mapping
Thermal imaging shows temperature differentials that indicate moisture intrusion behind walls, ceilings, and floors — no guessing, no unnecessary demolition.
📋
Lab-Certified Written Reports
Written inspection reports with accredited lab data. Suitable for real estate transactions, insurance claims, and legal proceedings in San Antonio, TX.
$
Transparent Flat-Rate Inspection Fees
Single flat-rate fee for the full Mold Inspection, air sampling, and written report. No hidden per-sample charges after the fact.
Inspection Services

What Our San Antonio Inspectors Do

From pre-purchase buyer inspections to post-remediation clearance, every scenario covered with the same rigorous protocol.

🏠
Pre-Purchase Buyer Mold Inspection
Before you close on a San Antonio, TX property, our inspectors assess moisture intrusion history, map any active mold zones, and collect air samples for lab analysis. A written report with findings gives buyers and their agents leverage — and peace of mind. Elevated spore counts found during a pre-purchase inspection have saved our clients far more than the inspection cost.
🔒
Post-Remediation Clearance Inspection
After mold remediation, an independent clearance inspection verifies the work achieved its objective. Our San Antonio, TX inspectors collect post-remediation air samples at the treated zone and compare them to an outdoor baseline — confirming indoor spore counts have returned to acceptable levels before re-occupancy.
📈
Odor Investigation & Hidden Mold Survey
When you smell mold but can't see it, our San Antonio, TX odor investigation protocol uses non-invasive tools to locate the source. Thermal camera sweeps, systematic moisture readings, and targeted air sampling tell us where to look — and what we find — before any opening of walls.
🏢
Commercial & Multi-Family Property Inspection
Office buildings, schools, apartment complexes, and retail spaces in San Antonio, TX require thorough documentation for liability, tenant relations, and insurance. Our commercial Mold Inspection teams cover multiple floors, HVAC systems, and shared spaces — producing zone-by-zone written reports with air sample data for each inspected area.
💧
Water Damage & Moisture Intrusion Assessment
Post-flood and post-leak moisture assessments in San Antonio use calibrated pin and pinless meters, thermal imaging, and psychrometric readings to map the full moisture extent. Written report identifies zones at high risk of mold development based on material type and moisture content readings.
📄
Real Estate & Landlord Disclosure Inspection
Sellers, landlords, and property managers in San Antonio, TX use our written Mold Inspection reports to satisfy disclosure obligations and protect against future liability. Our reports include photos, air sample data, moisture readings, and inspector findings — the documentation that holds up if questions arise later.
Professional Mold Inspection technician working in San Antonio, TX
How It Works

Your San Antonio, TX Mold Inspection — Step by Step

From scheduling to written report — here's exactly what the process looks like.

1
Schedule Your Mold Inspection
Call or text +1-844-578-1604. We find a same-day or next-day window for your San Antonio, TX location.
2
Inspector Arrives
Your certified inspector arrives with thermal camera, calibrated moisture meters, and air sampling equipment. A systematic walkthrough covers all risk zones in your San Antonio property.
3
Lab Analysis
Spore trap cassettes are shipped to an accredited laboratory for species identification and concentration analysis. Results typically return within 24–48 hours.
4
Report in Hand
You receive a comprehensive written report: lab findings, moisture readings, inspector observations, photos, and specific remediation recommendations if warranted.
24/7 Emergency Mold Inspection experts in San Antonio, TX
Reviews

Real Reviews From San Antonio Property Owners

★★★★★
The thermal imaging during our San Antonio inspection found moisture behind a wall that looked completely dry to the eye. Turned out there was a slow roof leak feeding a significant mold colony in the wall cavity. The written report from Cheap Mold Removal was exactly what our real estate attorney needed.
Sandra L.
Homebuyer, San Antonio
★★★★★
Our tenants complained about mold odor but we couldn't find anything visible. Cheap Mold Removal's inspector used a borescope to look inside the wall cavity near the HVAC return — found significant Aspergillus growth on the back side of the drywall. Without the inspection, we would have kept replacing surface materials and never fixed the actual problem.
James P.
Landlord, San Antonio, TX
★★★★★
Used Cheap Mold Removal for our office building after employees started having allergy symptoms. The Mold Inspection found elevated spore counts near an HVAC return in two zones. Written report supported our insurance claim and got remediation funded without dispute.
Principal R. Ochoa
School administrator, San Antonio, TX
FAQ

What San Antonio Clients Ask Before Booking

In practice, a Mold Inspection includes both the physical property assessment and the sampling/lab analysis. Standalone mold testing typically refers to air or surface sample collection without the full inspection protocol. For a complete picture of your San Antonio, TX property's condition, the full Mold Inspection is usually the appropriate starting point.
The on-site inspection typically takes 60–90 minutes for a standard residential property in San Antonio. Larger homes, multi-family properties, or commercial spaces take longer proportionally. Air sample results from the accredited lab typically return within 24–48 hours, after which your written report is compiled and delivered.
Our written inspection report gives you the data: species identified, concentration relative to outdoor baseline, and locations of moisture and visible growth. We translate findings into plain-language recommendations. For health-related concerns, we recommend sharing the report with your primary care physician alongside our findings.
Pre-purchase mold inspections in San Antonio have saved our clients significant money. We've found undisclosed crawl space mold, wall cavity infestations masked by fresh paint, and HVAC systems with Aspergillus growth — all in properties where the standard home inspection found nothing actionable.
Standard equipment for a San Antonio, TX mold inspection includes thermal camera, calibrated moisture meters, RH/temp probe, air sampling pump with spore trap cassettes, and borescope for wall cavity investigation when warranted. Photos are taken throughout and included in the written report.

Mold Inspection Coverage — San Antonio & Surrounding San Antonio, TX

Cheap Mold Removal performs certified Mold Inspection throughout San Antonio, TX — including San Antonio and nearby communities in TX. Same-day and next-day scheduling available.

Serving zip codes: 78112 78239 78259 78258 78252 78251 78250 78257 78256 78255 78254 78208 78201 78202 78203 78204 78205 78207 78231 78230 78233 78232 78235 78234 78237 78238 78209 78109 78266 78264 78260 78219 78218 78217 78216 78215 78214 78213 78212 78211 78210 78244 78245 78247 78240 78242 78248 78249 78073 78023 78222 78223 78220 78221 78226 78227 78224 78225 78228 78229 78206 78241 78246 78265 78268 78269 78270 78278 78279 78280 78283 78284 78285 78288 78289 78291 78292 78293 78294 78295 78296 78297 78298 78299 78253 78261

Schedule Your Mold Inspection — +1-844-578-1604

Don't Guess: Get Certified Mold Inspection in San Antonio

Thermal imaging, lab-certified air samples, and a written report you can use — available now in San Antonio, TX.

📞 Call +1-844-578-1604

Our Services in San Antonio, TX

🟢 Techs On Duty in San Antonio, TX Call +1-844-578-1604